2023 Home Depot Metal Roof Prices, Installation, Pros & Cons

Typical Price Range To Install a new Roof
Low
$4,090
Average
$5,138
High
$7,418
See costs in your area

Although Home Depot provides a wide range of home improvement products, the company’s roofing material offer is somewhat limited.

However, metal roofing is one of the few roofing options Home Depot does offer.

Home Depot metal roofing is a popular choice for homeowners and homebuilders due to its longevity, energy efficiency, and aesthetic appeal. 

If you are ready to install a new metal roof, contact your local roofing pros for FREE ESTIMATES!

Does Home Depot Sell Metal Roofing?

While limited in selection, Home Depot does sell metal roofing.

Homeowners and contractors can choose between galvanized and Galvalume steel metal panels.

Galvanized steel is the most common type of steel roofing. It’s created using a layer of zinc to prevent the steel from corroding.

Besides zinc, Galvalume steel’s manufacturing involves aluminum and silicone. 

Generally speaking, steel is the most robust metal roofing option, making it ideal for locations prone to heavy snowfalls and hail.

Home Depot Metal Roofing Average Cost

Home Depot offers metal roofing panels in several different lengths.

Homeowners should order panels long enough to cover the entire length of their roof, from the ridge to the eave, thus avoiding seams. 

On average, installing Home Depot metal roof costs between $5 and $10 per square foot.

This cost includes the necessary materials, accessories, and labor.

So, homeowners can expect to pay between $10,000 and $20,000 for an average 2,000-square-foot roof.

Metal Roofing Type Average Cost per Panel Average Material Cost per Square Foot Average Labor Cost per Square Foot Avera Total Cost for a 2,000-Square Foot Roof
8-Foot Metal Roofing $21.48-$39.31 $1.50-$1.64 $3.50-$7.50 $10,000-$18,280
10-Foot Metal Roofing $21.48 $1.50 $3.50-$5 $10,000-$13,000
12-Foot Metal Roofing $48.85 $1.36 $3.50-$5 $9,720-$12,720
16-Foot Metal Roofing $115.88 $2.41 $3.50-$5 $11,820-$14,820

Check out our Complete Guide to Metal Roofing Prices.

Home Depot Metal Roofing 8 Ft

For 8-foot metal panels, Home Depot offers both galvanized and Galvalume steel options.

The galvanized steel 31-gauge roofing panels can be used for a wide variety of applications and DIY projects.

Home Depot’s 8 ft galvanized steel panels can be painted or aged to produce an appealing visual effect.

Homeowners will have no trouble working with these panels as they are thin and lightweight.

They can be cut using shears or standard aviation snips.

These galvanized steel panels cost $21.48 for 14.3 square feet of coverage, which comes out to $1.50 per square foot.

As for Home Depot’s 8 ft Galvalume steel panels, they share many of the same characteristics when it comes to durability, resistance, and ease of use.

However, they are already painted, so homeowners can choose one of nine color options.

The Galvalume steel panels cost $39.31 for 24 square feet of coverage or $1.64 per square foot.

Home Depot Metal Roof 10 Ft

Home Depot offers a single variety of 10-foot metal panels: Gibraltar’s painted Galvalume steel panels.

Like all SM-Rib panels, this is an exposed fastener panel.

Being lightweight, the 10 ft metal panels are easy to cut with shears and install on the roof.

They’re also highly resistant to fire, mold and mildew, and adverse weather conditions.

These Home Depot metal panels come in five color options with a 29-gauge thickness.

The minimum purchase required for the 10 ft panels is 10 pieces, at $21.48 per piece.

Each panel can cover 14.3 square feet of roof, meaning this roofing option costs $1.50 per square foot.

Home Depot Metal Roof 12 Ft

Homeowners looking to buy 12-foot metal panels can purchase Gibraltar’s painted SM-Rib panels at Home Depot.

These panels can be used for roofing any structure, from simple sheds to complex residential developments.

They are durable, long-lasting, and require little maintenance.

They also have a 29-gauge thickness, making them ideal for roof slopes of 3/12 pitch or greater.

These panels are available in nine color options, from basic white and black to striking green and red.

Home Depot requires homeowners and contractors to buy at least 10 pieces of these metal panels at $48.85 per piece.

A single panel covers 36 square feet of roof, meaning homeowners will pay $1.36 per square foot for this roofing option.

Home Depot Metal Roof Panels 16 Ft

When it comes to 16-foot metal panels, Hope Depot offers one option: Gibraltar’s Galvalume steel painted panels.

Durable and lightweight, these panels can be used for various residential and commercial applications.

They are easy to install and transport.

These metal roofing panels can also withstand the harshest weather conditions thanks to a rugged polyester finish.

With 29-gauge thickness, these metal panels are recommended for 3/12 pitch or higher roof slopes.

They are available in seven colors, including more vivid options like red and green.

Homeowners and contractors must buy at least 10 pieces of this metal roofing at $115.88 per piece.

Given that a single panel covers 48 square feet of roof, the price comes out at $2.41 per square foot.

These panels are the most expensive option that Home Depot offers in terms of metal roofing.

Average Roof Costs For:
Most Homeowners Spent Between: Most People Spent: $4,190 - $5,740 (For a 1600 sq. ft. Roof)
Low End
$3,931
Average
$5,148
High End
$9,371

See costs in your area Start Here - Enter Your Zip Code


Home Depot Metal Roof Cost Breakdown

When installing a metal roof, homeowners must keep several expenses in mind.

Material

Home Depot metal roof materials come in premeasured sheets.

You can find detailed specifications for each sheet to determine how much square footage it covers. 

These panels range from $1.36 to $2.41 per square foot, which is on par with the average price of a corrugated steel roof.

Accessories

Besides the material, you’ll need to purchase some accessories to complete the roofing project successfully.

These include:

  • Sealant tape: approximately $7 per 50 square feet
  • Fasteners: approximately $7 per 50 screws
  • Closure strips: approximately $8 per 150 inches of tape
  • Synthetic underlayment: approximately $100 for 1,000 square feet
  • Drip edge flashing: approximately $7 per 120 inches of length
  • Ridge cap: approximately $12 per square foot

Pro Tip: Order the roofing screws from Home Depot as well to ensure they match the color of your roofing panels. Then, make sure to carefully follow the company’s instructions on placing the screws. Sometimes, you must drive fasteners directly into ribs, while other metal panels call for flat surface placement.

Installation

Home Depot metal panels are thin and lightweight, making them easy to transport, move, and install.

As a result, skillful homeowners on a budget can carry out a DIY installation, thus eliminating the labor cost.

However, the metal roof installation process is still considered complex and hazardous. For this reason, it’s often best to leave this task to a professional installer.

Homeowners who aren’t particularly DIY-savvy can expect to pay between $3.50 and $7.50 per square foot for a professional installation.

The exact cost depends on the complexity of the roof and the metal type you choose.

Galvanized steel panels are more challenging to install, resulting in higher labor costs. 

Home Depot vs Lowes Metal Roofing

When it comes to metal roofing, Home Depot offers a broader selection of panels than Lowes, both in terms of size and color choices.

At Lowes, you can find only 8 and 12-foot metal panels.

They are all silver steel panels and come in two types: corrugated and ribbed. These types differ slightly in how their surface is shaped.

Generally speaking, both options are excellent for homeowners looking for a cost-effective roofing solution.

Lowes offers two types of 8-foot metal panels.

The ribbed type is available in two widths: 2.16 and 3.17 feet.

The 2.16-foot panels are galvanized steel, while the 3.17-foot ones are Galvalume steel.

These panels are highly durable, making them great for storm-prone areas.

They can be installed over an existing shingle roof

In terms of cost, these panels range from $21.98 to $36.98 per panel, which translates to $1.30 to $1.50 per square foot.

As for the 12-foot panels, things are pretty much the same.

You can choose between ribbed or corrugated and galvanized or Galvalume steel sheets.

The color selection for the Galvalume sheets includes only four options: white, silver, green, and terracotta red. 

The 12-foot metal panels range between $31.98 and $53.98 per panel or between $1.88 and $2.16 per square foot.

Typical Price Range To Install a Metal Roof Average: $9,150 - $14,310
See costs in your area

Does Home Depot Cut Metal Roofing?

When installing a metal roof, you might need to cut the panels to fit specific angles. 

Unfortunately, Home Depot doesn’t cut metal roofing materials.

However, all the metal panels the company offer are thin and lightweight, making them easy to manipulate and cut.

So, if you have the proper skills and tools, you can cut Home Depot metal panels on your own.

If you are uncomfortable with this task, you can find local roofing companies offering this service.

Alternatively, you can hire a professional metal cutter to avoid sustaining an injury or damaging the roofing supplies.

How To Install A Metal Roof From Home Depot

All Home Depot metal panels are of the exposed fastener type, making them more manageable and less expensive to install.

As a result, DIY-savvy homeowners can take on this project, provided they have the necessary tools and equipment.

If the homeowner doesn’t own the tools, they can rent them at Home Depot.

Besides the tools and the fall-protection equipment, it’s advisable to have at least one or two helpers when installing the roof.

With all this in mind, here’s a step-by-step guide on installing your metal roofing panels from Home Depot.

Step 1: Take the Necessary Safety Precautions 

Individuals engaging in any installation that requires working above ground must prioritize safety.

Homeowners carrying out a DIY roof installation should do the following:

  • Secure their ladder at the base and the point of roof contact
  • Test the ladder before climbing
  • Use adequate fall-protection equipment
  • Ensure no branches or electrical wires are hanging over the roof
  • Wear gloves and safety goggles
  • Wear safety shoes

Step 2: Measure the Roof

Once it’s safe to climb onto the roof, homeowners can start by measuring the roof.

Knowing the square footage of the roof is crucial for ordering the correct amount of materials.

Besides measuring the total square footage, homeowners should check the length of each roof section, measuring from the ridge to the eave’s outer edge. This distance dictates how long the metal panels should be.

Here’s how to correctly measure your roof:

  1. Measure the roof’s rake (the distance between the ridge and the eave’s outer edge).
  2. Measure the roof’s width, including eaves.
  3. Multiply the two values from steps 1 and 2.
  4. Multiply the value from step 3 by 2 to get the total square footage of the roof.

Pro Tip: When ordering roofing supplies, always add 10% of the materials to account for waste.

Step 3: Remove Old Roofing

When the new materials arrive, it’s time to remove the old roofing.

Of course, homeowners can choose to install metal roofing over their existing roof. However, this isn’t recommended.

By removing the old roofing, homeowners can inspect the sheathing and the flashing and replace damaged areas before moving forward, thus reducing the risk of a leak. 

When removing the old roofing, make sure to do the following:

  • Start from the top of the roof
  • Remove the flashing, underlayment, and vents too
  • Pull out or hammer down larger nails 
  • Repair any existing damage using sealants and roofing adhesive

Step 4: Install an Underlayment

While this isn’t a necessary step, installing roof underlayment can help minimize the risk of leaks and water damage to your home.

When it comes to metal roofing, you can generally choose a synthetic or a felt underlayment.

Synthetic underlayment is considered a more advanced option than its felt counterpart.

This lightweight underlayment comes in larger rolls and is more durable, tolerant to higher temperatures, and retains less heat.

Ensure to carefully follow the instructions provided by the manufacturer regarding the underlayment installation since the sheathing expands and contracts at different rates than the metal panels. 

Pro Tip: If you’re installing the metal roof on your own, cut the underlayment into manageable pieces before starting the project.

Average Roof Costs For:
Most Homeowners Spent Between: Most People Spent: $4,190 - $5,740 (For a 1600 sq. ft. Roof)
Low End
$3,931
Average
$5,148
High End
$9,371

See costs in your area Start Here - Enter Your Zip Code


Step 5: Install the Drip Edge and Closure Strips

There are a few things to take care of before installing the metal panels.

Start by installing the drip edge along the eaves and the roof rake.

Use 1 1/4-inch galvanized nails, placing a nail approximately every 16 inches. 

When installing multiple runs of drip edge, you should overlap them by 1/4 to 1/2 inches.

Also, make sure to keep the nail back from the joint. 

Once you install the drip edge around the perimeter of the roof, add sealant tape along its top, about 1 inch from the drip flashing’s edge.

Then, place inside closure strips on top of the sealant tape, being careful not to stretch them.

Did you know? If you have gutters installed on the eaves, you must also install a drip-edge flashing.

Step 6: Install the Metal Panels

Once the foundation is laid, it’s time to install the purchased Home Depot metal panels.

It would be best to work your way from the bottom up to avoid buckling. 

The first metal panel should overlap the edging by 1/2 to 3/4 of an inch and be square to the roof line.

Then, place the screws according to the manufacturer’s guidelines.

When securing the screws, avoid overtightening them.

The screw is placed adequately if the washer underneath doesn’t bulge or shift.

After fastening a panel, apply a 100% silicone sealant under the next panel’s small edge.

Overlap the large edge of the panel you’ve already installed with the short edge of the next panel. The applied silicone will spread and adhere, thus creating a seal.

Continue adding metal panels until your roof is completely covered. 

Step 7: Install Ridge Cap

Once all the panels are in place, finish the job by capping the ridge

This task involves installing an outside closure strip.

This strip runs over the top of the metal panels, matching the panel’s ridges and flat parts in shape.

Did you know? There are two types of outside closure strips. Use the vented closure strips if your roof needs to be vented at the ridge. These will act as a ridge vent. Otherwise, you can use solid closure strips.

To install the ridge cap, do the following:

  1. Position the ridge cap, ensuring it overlaps each side of the roof evenly.
  2. Mark where the ridge cap will sit along the metal roof panels using chalk.
  3. Apply a strip of sealant tape on the entire length of the ridge on both sides of the roof.
  4. Apply another strip of tape along the applied closure strips on both sides of the roof.
  5. Install the ridge cap following the attached instructions.

Homeowners who don’t feel confident they can complete this task successfully shouldn’t hesitate to hire a professional installer.

Before hiring a professional, make sure to do thorough research and select a team experienced with metal roofs.

Preferably, the company should be insured and licensed as your state requires.

What Is The Cheapest Metal Roofing At Home Depot?

The cheapest metal roofing at Home Depot is the 12-foot painted Galvalume steel SM-Rib panel from Gibraltar.

These panels cost $48.85 per piece, which translates to $1.36 per square foot.

However, keep in mind that you can’t order a single panel. At a minimum, you must order 10 panels for your roofing or siding project.

Make Sure To Cover All The Bases

Metal roofing is a wise investment for most homeowners.

A metal roof is durable and long-lasting thanks to the material’s resistance to fire, rot, and insect damage.

These roofs are also lightweight and can be energy-efficient, reducing cooling costs in the summer.

A metal roof from Home Depot is an excellent choice for homeowners looking for a cost-effective solution for a DIY roof installation.

Of course, proper installation is crucial for the roof’s longevity and performance. Therefore, only homeowners who possess the necessary skills and equipment should take on the project.

With proper installation and maintenance, Home Depot metal roof panels will protect your home for decades to come, even if you live in an area prone to extreme weather conditions.

Typical Price Range To Install a Metal Roof Average: $9,150 - $14,310
See costs in your area

Author: Leo B
For over 20 years Leo has run a successful roofing business in New England, specializing in metal roofing, as well as cool flat roofing technologies. Having replaced and installed hundreds of roofs in New England, Leo has first hand experience with pretty much every residential roofing material and roofing manufacturer available in the US.
There are: One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

One comment on “2023 Home Depot Metal Roof Prices, Installation, Pros & Cons

  1. Just wondering if you could add some kind of calculator to enter the square footage.
    For example a barn with 5000 sq. feet it would be 5000+10% waste * panel cost + flashing, repairs, labor, …