Your Roofing Estimate Request Was Submitted


Your request to get Roof estimates was submitted. Approved Roofing Contractors will contact You Soon.

You will receive an email notification, and your local roofers will contact you soon, via phone or e-mail.

Many Homeowners also get these Projects with their New Roof:


Why Replacing Roof, Siding & Gutters together makes sense?

Most Roofing Contractors also specialize in Siding, Gutters and sometimes replacement windows.
Doing tow or more of these projects together will typically result in up-to 15-20% cost saving, compared to hiring individual contractor for each project.

Savings usually are realized on two sides. Ordering more materials, will reduce cost from the supplier, and since Roofing, Siding and Gutters are typically soled by the same local distributors, savings can be substantial.

For the contractor, it is easier to bring all their tools, equipment and ladders to one job site for a single large project, that to go between smaller jobs. Thus, homeowners should request, and will typically realize a substantial discount off multi-project job.

What’s the best order of installing Roofing, Siding and Gutters?

This one is very simple. Yet, many contractors and homeowners make this critical mistake, which can result in extra costs OR damaged house exterior.

Roofing, Siding and Gutters (and Windows, if applicable) should be installed form Top to Bottom order.

This means, your Roof should be replaced first. Next are the gutters. Last – siding and windows.

Why Roof should always be replaced first?

It is simple – roof is the most messy project. In most, the old roofing shingles are removed (stripped) and then new shingles are installed. During both of these stages, falling debris may and usually do damage gutters, singing and sometimes even break windows!

A roof shingle scratch mark on your siding can NEVER BE COMPLETELY REMOVED.

Therefore, the roof should always be replaced first!

Typical Price Range To Install Seamless Gutters Average: $820 - $1,245
See costs in your area

What’s Next?

While you are waiting to get your free quotes, you can:

Installation prices for most popular roofing materials in US:



All prices are for an average 1 story walkable ranch/cape house, and include labor, materials, dump fees, building permit, roofer overhead and profit. Below are real national average costs for each roofing material that you can estimate with our roof calculator:

Architectural Shingles$5,312( $356 per square )
3-tab Asphalt Shingles$5,262( $353 per square )
Standing Seam Metal Roof$12,234( $821 per square )
Metal Shingles Roof$12,439( $835 per square )
R-panel Metal Roof$9,281( $623 per square )
EPDM Rubber Roof$9,086( $610 per square )
TPO Flat Roof$10,020( $672 per square )
PVC Flat Roof$11,045( $741 per square )
Cedar Shingles or Shakes$11,571( $777 per square )
Natural Slate$17,344( $1,164 per square )
Synthetic Slate$14,774( $992 per square )
Clay/Concrete Tile Roof$13,544( $909 per square )
Note: Above prices are based on contractors prices in our Local Roofers Directory, and 750,729 roofing projects estimated by RoofCalc.org. Prices vary by state (see regional details below).